Bryan996 Posted 1 November 2017 Share Posted 1 November 2017 I'm guessing that the appeal for this might be limited however I've decided to sell one of my actions to help funds towards a new kitchen! Its an Anschutz 54 action (was an 1813) that I had re barrelled in April 2016 by Robert Nibbs (system gemini) with a True Flite barrel I bought from Ryan at Intershoot. The headspace was set at 41 thou and this was part of a project where I had both my 1813 actions re barreled by Robert. One to 41 thou for Lapua/RWS and one at 39 thou for Eley. The idea being to have identical actions that I could use with all ammo and have one for competitions and one for training. In reality I've stuck with one action as they both have different tunes with my staric tuner and it just ended up too complicated changing everything over, so it hasn't been used since February this year. It has only shot 5800 rounds and is effectively only just broken in. I'm asking £1500 which returns me my costs and is the same as a new barreled action from Edinkillie, however this will come with a Grunig & Elmiger tube (worth £224), an Anschutz trigger shoe (£40) and 1000 rounds of matched Lapua Midas+ (£273). The cost of the barrel was £400, the action was £400 and it was £300 to have it fitted by Robert. I've attached photos of the group testing at Eley, and if you're going by group size, the Lapua did perform slightly better than the Eley as I'd expected due to the headspace of 41. The 40 shot consolidated group for the Lapua was 16.0mm (each ten shot was 12.1, 13.1, 13.8 and 14.2). So it's a good performing barrel. I've also changed both firing pin springs and ejectors this year so it's all fresh. One thing to note is that the leade engagement is very tight and if you close the bolt on a live and dont fire it it wont eject then round (you'll need to get something in there to pry it out gently), this is by design and exactly how Lilja set up their barrels. I'm located in Surrey about 10 minutes from Bisley so if anyone wants to try it I can meet them at the Lord Roberts for a hour, any questions just ask or PM me. Finally if it doesn't sell for the asking price I'll keep as a spare as planned and put the new oven on the credit card instead! thanks Bryan Link to comment Share on other sites More sharing options...
Rob Thorp Posted 4 December 2017 Share Posted 4 December 2017 Hi, can l ask, is this still available....and what the external barrel diameter is? Thanks in anticipation. rob Link to comment Share on other sites More sharing options...
Bryan996 Posted 5 December 2017 Author Share Posted 5 December 2017 Hi Rob It is still available. The barrel is 0.9 Inch (22.86mm) straight until the mounting for the tube where its machined down to 22mm for the Grunig tube. hope this helps, Bryan Link to comment Share on other sites More sharing options...
Rob Thorp Posted 5 December 2017 Share Posted 5 December 2017 Cheers Bryan, Interesting...... Thanks for the response....cogs turning! Was seeking a 22mm ‘Standard’ rifle barrel & action....but like what you & Robert have done. Have made errors in the past with a ‘heavy barrel’. I will give it some honest thought. Thanks again. Rob Link to comment Share on other sites More sharing options...
Bryan996 Posted 6 December 2017 Author Share Posted 6 December 2017 Not a problem, pm me if you're interested. If you're considering a new barrel and don't want to take a gamble on how accurate it might be then this is for you! p.s. I've shot 598 at Bisley a year ago with this barrel and ammo so I know it works. Link to comment Share on other sites More sharing options...
Bryan996 Posted 2 January 2018 Author Share Posted 2 January 2018 I would add that I will take £1250 if you dont want the Midas+ ammo (I'll use it for training in my other action). Link to comment Share on other sites More sharing options...
Rob Thorp Posted 2 January 2018 Share Posted 2 January 2018 Cheers Bryan, all received and understood. Cogs still turning! Rob Link to comment Share on other sites More sharing options...
Bedrockbhoy Posted 27 April 2018 Share Posted 27 April 2018 Thanks for the offer but a bit out of my price range cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now