Jimlad Posted 28 March 2017 Share Posted 28 March 2017 Hi All Not very hopeful but we thought we would give it a try, we have in the club an Anchutz 8002 Alu stock 177 Match Air Rifle which was accidently knocked off a table causing the stock to snap near the pistol grip. Has anyone come across this problem before? can the stock be repaired? or is there someone out there with a spare stock that would fit this rifle? Jim Link to comment Share on other sites More sharing options...
batty Posted 28 March 2017 Share Posted 28 March 2017 If you are nsra affiliated, put in a claim! Link to comment Share on other sites More sharing options...
tim s Posted 28 March 2017 Share Posted 28 March 2017 Can the broken pieces not be glued together, and the grip reinforced with a dowel or threaded rod? Link to comment Share on other sites More sharing options...
Jimlad Posted 28 March 2017 Author Share Posted 28 March 2017 Hi Thanks for the replies, Insurance has been sorted (paid out) unable to find a new replacement stock it is the aluminium that has snapped very thin cross section not able to repair, we still have the pieces the rifle itself is in good working order pity to waste Link to comment Share on other sites More sharing options...
Martin Hunt Posted 28 March 2017 Share Posted 28 March 2017 Hi We had several Anschutz .22 cast alloy stocks of the same type break when dropped. We were able to get them repaired by welding them by a good aluminium welding company. The repair increases the cross section at the thin part a little bit so it is stronger. We haven't had any problems with any of the repaired stocks since. Martin Huey 1 Link to comment Share on other sites More sharing options...
Jimlad Posted 28 March 2017 Author Share Posted 28 March 2017 Thanks for that will look into it Link to comment Share on other sites More sharing options...
Trident Posted 30 March 2017 Share Posted 30 March 2017 Not an aluminium stock, but a possible option? (not mine, by the way.) http://www.ebay.co.uk/itm/Anschutz-8002-Laminated-Air-Rifle-Stock-/132125214888?hash=item1ec346c8a8:g:368AAOSwzgBYxuRq Link to comment Share on other sites More sharing options...
RobinC Posted 30 March 2017 Share Posted 30 March 2017 Like Martin I have also seen Anni alloy stocks break when dropped, it does need a very good alloy experienced welder, but a really good alloy welder will repair it. Link to comment Share on other sites More sharing options...
Jimlad Posted 31 March 2017 Author Share Posted 31 March 2017 Thanks for the replies Link to comment Share on other sites More sharing options...
Huey Posted 3 April 2017 Share Posted 3 April 2017 Hi All Not very hopeful but we thought we would give it a try, we have in the club an Anchutz 8002 Alu stock 177 Match Air Rifle which was accidently knocked off a table causing the stock to snap near the pistol grip. Has anyone come across this problem before? can the stock be repaired? or is there someone out there with a spare stock that would fit this rifle? Jim A club member, Andy at www.specialistweldingservice.co.uk, fixed my 2213 smallbore stock for me a few years ago. Mine fell off a bench :/ He put a little more meat on it so it would be stronger than it was originally. I also have an 8002 and can say they are pretty similar in this area. I touched it up with Humbrol enamel afterwards and you can hardly tell. Link to comment Share on other sites More sharing options...
Jimlad Posted 4 April 2017 Author Share Posted 4 April 2017 Thanks for the replies been welded and is as good as new Jim Trident and Huey 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now