Cheek Piece

[10.9ninja]

Been on the hunt for a while now for a .22 cheek piece.

 

Open to whats available as I have the stock rods, just needs the actual cheek piece to attach them to for a anschutz 2013 stock

 

thanks

 

 

[batty]

Make one!! Screw a piece of wood to it

[tim s]

Batty is right. You can make your own cheekpiece. A length of softwood battening is a good start, as it's easy to carve to shape. You can use this as a template to make a "best" one from nice hardwood later if desired.

[jonty]

Batty is right. You can make your own cheekpiece. A length of softwood battening is a good start, as it's easy to carve to shape. You can use this as a template to make a "best" one from nice hardwood later if desired.

 

I have a template for one drawn on paper. If your, or someone elses skills permit, I would try and make one from a piece of plastic which could be heated and bent/formed so it would look like the ones fitted to the G&E XRS stock.

 

The ones fitted to the 2013 are plywood or laminate which are formed and machined. very difficult to copy, and very expensive to buy. They have a tendency to crack across where it is angled. A bit like the stock! Take care.

 

Jonty

[Robert White]

I have a spare one with carrier and both length of legs and heavy legs for balance if you want

 

Give me a call Robert

 

07774621059