Guest Richard Lay Posted 21 August 2012 Share Posted 21 August 2012 Need some sight raisers for my Match 54 barrel. Any sizes welcome, would like to possibly get a few different sizes so that I can fiddle around and get a nice height for me. Many thanks Link to comment Share on other sites More sharing options...
jimrward Posted 21 August 2012 Share Posted 21 August 2012 I have pair of offset 8mm-10mm raiser blocks, you are quite welcome to try before you buy to see if it meets your needs Link to comment Share on other sites More sharing options...
Guest Richard Lay Posted 22 August 2012 Share Posted 22 August 2012 Sound like a good height, but do they have to be offset, or can you set them so that they are central? Also, what sort of price were you thinking? Thanks Link to comment Share on other sites More sharing options...
jimrward Posted 24 August 2012 Share Posted 24 August 2012 Hi Richard, bit of technology blip, my water pump on my PC packed in The blocks in question are Centra Track blocks, which you can find on the edinkillie website @ £75 new, I was thinking £50 ono, would you like to try them first for height, then can be set central or left or right, it is best to do them as a pair, so that front and rear sight match as close as possible, by sliding them both onto the rear sight rail, slacken screws, offset and then gently tighten screws when both match Link to comment Share on other sites More sharing options...
Guest Richard Lay Posted 26 August 2012 Share Posted 26 August 2012 OK these sound good. Just to confirm, these will definitely fit on a Match 54? I presume they are in pretty good condition? Out of interest, you wouldn't happen to have any other sizes? Thanks Link to comment Share on other sites More sharing options...
Squishy Posted 26 August 2012 Share Posted 26 August 2012 I still cant find that front block. This is getting very annoying! Link to comment Share on other sites More sharing options...
jimrward Posted 26 August 2012 Share Posted 26 August 2012 Richard the blocks are split down the middle, so the grooves on top parallel the grooves below, so width wise the should be adaptable depends on depth of groove, as I am not sure what tracks are on the match 54, I can try them on my 1913 assuming the tracking is the same Link to comment Share on other sites More sharing options...
tim s Posted 26 August 2012 Share Posted 26 August 2012 Hmm, the foresight block probably won't work. I'll presume a "Match 54" means a 14xx rifle. A block for a 1913 foresight will fit a 14/16/18xx barrel, but the foresight won't then fit on the block. The rear block will be OK as nothing has changed there, but you probably want a foresight block labeled "Match 54" or 1407-1813. Link to comment Share on other sites More sharing options...
Guest Richard Lay Posted 27 August 2012 Share Posted 27 August 2012 Haha no worries Squishy! Ok thanks Tim S, by the sounds of that, don't think these will be for me thanks anyway Jimrward. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now