Bing Posted 5 September Share Posted 5 September If anyone has a spare one knocking around or knows of anyone who may have one, please drop me a message. Thanks Brian. Link to comment Share on other sites More sharing options...
iainfm Posted 24 September Share Posted 24 September Is it this you're after? Found one amongst an ex-member's kit. Buz1440 1 Link to comment Share on other sites More sharing options...
Irontrack Posted 26 September Share Posted 26 September Hi Has Bing taken this. If it's still available, I'm interested. Regards, Mick Link to comment Share on other sites More sharing options...
iainfm Posted 27 September Share Posted 27 September Sorry, been away with work most of the week. The one I have is currently spoken for, pending checks it's suitable. Best wishes, Iain Link to comment Share on other sites More sharing options...
Colin Posted 28 September Share Posted 28 September Mick, they are quite easy to make 5/16 UNF set screw 1 1/2" long, saw the head off and drill a 5mm hole in the end, about 25mm deep if you can manage it 1 Motorcycle speedo cable (I used one for a Honda CBR 900 RR Fireblade because it was heavy duty and cheap) 1 M8 x 40mm star knob Resin wall anchor glue (left over from fixing my cabinet Cut the cable to length so that the inner cable extends beyond the housing, the same depth as the hole in your screw at one end and about 10mm at the other Making tape around the end of the screw to keep the threads clear Pump some of the resin in either end of the cable housing to lock the cable and housing sleeve together and into the hole in the screw, insert that end, then insert resin into the thread on the star knob and insert the other end. Clean it all up when the resin has set and job done, maybe a bit of shrink wrap over the end of the screw cable join to tidy it up Bing and Buz1440 1 1 Link to comment Share on other sites More sharing options...
Bing Posted 8 October Author Share Posted 8 October On 24/09/2024 at 17:37, iainfm said: Is it this you're after? Found one amongst an ex-member's kit. Possibly is the one, I've never seen the actual twiddly thing not attached to the stand, so not 100% sure what it looks like. If it becomes available, I'll happily take it. Thanks Bing Link to comment Share on other sites More sharing options...
iainfm Posted 9 October Share Posted 9 October The one I had is spoken for, sorry. I'll have a rummage and see if there's another, but I don't recall seeing one. They do seem pretty easy to make though - Colin's method above sounds like it'd to the trick! Bing 1 Link to comment Share on other sites More sharing options...
Ark Fitz Posted Saturday at 19:07 Share Posted Saturday at 19:07 On 08/10/2024 at 21:28, Bing said: Possibly is the one, I've never seen the actual twiddly thing not attached to the stand, so not 100% sure what it looks like. If it becomes available, I'll happily take it. Thanks Bing Bing was tidying the club cabin this afternoon we have a spare one to fit a freeland old stand, see me next Saturday at the club M8t😉 Bing 1 Link to comment Share on other sites More sharing options...
Bing Posted Saturday at 21:15 Author Share Posted Saturday at 21:15 2 hours ago, Ark Fitz said: Bing was tidying the club cabin this afternoon we have a spare one to fit a freeland old stand, see me next Saturday at the club M8t😉 What a legend....😅👑 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now