Jump to content

tenpointnine

Shooting
 View Profile  See their activity

  • Posts

    263

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by tenpointnine

    Anschutz Rifle, Complete, Ready To Shoot.

    in Wanted

    Posted

    Someone in our club (Sunderland) has just decided to sell his 1813. It looks to be in good condition and he is asking £550, so is presumably open to a reasonable offer within your budget.

     

    Let me know if you are interested and I will get a contact number for you.

     

    Walter

    Retirement Sale

    in For Sale

    Posted

    I was looking for something last night and came across this old Rifleman from April 1992, showing a young (well younger) Chris Hector on the cover, after setting 2 new British records.

     

    Inside, a walnut stocked 1913 is £1,130 and Tenex is £75 per thousand.

     

    Those were the days!

     

    Enjoy your retirement Chris.

     

    Walter

    20100716095722468.pdf

    Stock For Sale

    in For Sale

    Posted · Edited by tenpointnine

    SOLD

     

    Anschutz walnut 1912 Sport Rifle stock for sale, complete with kneeling block, buttplate / carrier.(Just buttplate + carrier would be £315 new).

     

    Convenience of the butt and cheekpiece adjustability / interchangability of a metal stock, but with the vibration damping of a walnut stock, and at a fraction of the cost of a new metal stock.

     

    Just fit your 14 / 16 / 18 / 19 series action (07 or 13) and you are good to go.

     

    £400 plus postage

     

    Walter (tenpointnine@hotmail.com)

    post-197-127239811271_thumb.jpg

    Lsr Wanted

    in Wanted

    Posted

    Thanks for your reply, Alan.

     

    I did actually check on there yesterday before posting on here, and there were 127, so 1 must have sold! (I wonder if that was my clubmate?!!!)

     

    If he can't find what he wants on there he must be too fussy.

     

    Thanks again.

     

    Walter

    Lsr Wanted

    in Wanted

    Posted

    I appreciate that this board is read mainly by prone / 3P / Air shooters, but for any Light Sporting Rifle shooters out there, a club mate is looking for a used LSR, typically a Ruger 10/22 base. Do you know of any for sale?

     

    Walter

    Kurt Thune Mod 2 Sling For Sale

    in For Sale

    Posted · Edited by tenpointnine

    For Sale

     

    Kurt Thune Model 2 sling. Excellent condition. Current cost is £51, bargain @ £30.

     

    Walter

     

    OK then, £25 plus postage. Even bigger bargain!

    NOW SOLD, TO SOMEONE WITH AN EYE FOR A BARGAIN.

    post-197-126027858556_thumb.jpg

    L/handed Anschutz 1600 Series ***sold***

    in For Sale

    Posted · Edited by tenpointnine

    I agree. Where I have said 74-79, this was taken from the Anschutz website, but as I stated, the date code letters on mine (1799**X) relate to 1980.

     

    I couldn't get it to link to the actual page, so take this link to the catalogue then go to page 62.

     

    http://jga.anschuetz-sport.com/downloads/K...7.pdf?downloads

     

     

    Also from the Anschutz site : Since 1968 the year of manufacture is coded. The code for determining the age is as follows:

    0=A; 1=B; 2=C; 3=D, 4=E; 5=F; 6=G; 7=H; 8=I/J; 9=K

    The year of proof testing is described by the last two digits of a year, i. e. that a firearm with the letters AF was officially proof tested in the year 2005 (05).

     

    Walter

    L/handed Anschutz 1600 Series ***sold***

    in For Sale

    Posted · Edited by tenpointnine

    Hi Sink

    The 16 series ran from serial numbers 143655X to 182155X and from 1974 to 1979 (although the date letters on mine correspond to 1980), and is signified by the letter X at the end of the serial number. As the name suggests, it came between the 14 and 18 series, with a new trigger allegedly better than the 14.

     

    You will note that the bolt has a slot underneath, exposing the firing pin, another feature of the 16 series.

     

    As noted in 'Ways of The Rifle' these rifles are still sought after and many are still in use today (for those of us who can't afford Bleikers). I won the British Short Range with my 1607 in 2006, and it is still going strong, I just wish I was.

     

    Just a couple of years ago, Dave Phelps won the Roberts (more than once) with his 1613, although I believe he now uses a 1913.

     

    Hope this helps

     

    Regards

     

    Walter

    Head Space Gauges

    in For Sale

    Posted

    Bill Calfee, one of the USA's leading Benchrest gunsmiths sets headspace between 42 thou and 44 thou.

     

    If the headspace is too great it can cause inconsistent ignition, leading to loss of accuracy. By inconsistent ignition I am not referring to misfires.

     

    As you know, the priming compound in the rim of the case ignites when struck by the firing pin.

     

    If 1 cartridge is up against the breech face when the pin strikes, the resultant ignition will be different to a case which is up against the face of the bolt, and the firing pin pushes the case forward 2 or 3 thou before coming to a stop at the breech face, and THEN igniting. It is this inconsitent ignition which causes loss of accuracy.

     

    What can you do about it?

     

    Well, later model Anschutz (from the later 16 series with swept back bolt, to 18, 19 &20 series) can have a thin shim or shims fitted. These shims are available from guess who, that's right, Barry Nesom. (50p?)

     

    Earlier 16 and 14 models have a plunger on the bolt handle which mates with a notch in the bolt body, and this chews the shims up in no time.

     

    I believe the 20 series would have the headspace set by moving the barel in the action, which of course is clamped, not pinned.

     

    It is also possible to get a new bolt handle from Anschutz (which must be sent to an RFD, as it is effectively classed as a firearm). I did this with Claire's 1607 in 2002, and it was sent to Ian Gibb who stoned it to the correct headspace.

     

    Another method which I have observed in the Anschutz tent at Bisley, is to take the bolt apart and using a small hammer, tap the bolt around it's circumference at the point where the bolt handle butts up against it. This might be ok for an Anschutz technician, but I wouldn't recommend it for the rest of us!

     

    Not sure about Walthers or other makes.

     

    Hope this helps.

     

    Walter

×
×
  • Create New...

Important Information

Privacy Policy

  I accept