sunbeam Posted 6 February 2017 Share Posted 6 February 2017 Part 23 on the PDF attached This being the bit that usually wears out first Anschutz have decided not to make it anymore. According to Ruag it's unavailableI don't suppose anyone has one lying about? N ET_7002.pdf Link to comment Share on other sites More sharing options...
batty Posted 6 February 2017 Share Posted 6 February 2017 http://www.edinkillie.co.uk/ecatalog/anschutz-bolts-clamp-for-sights-p-1049.html?cPath=11_22 Link to comment Share on other sites More sharing options...
nicklock Posted 6 February 2017 Share Posted 6 February 2017 Wears out? Mine's over a decade old and still working! What are you doing to them? GaryD 1 Link to comment Share on other sites More sharing options...
GaryD Posted 6 February 2017 Share Posted 6 February 2017 Wears out? Mine's over a decade old and still working! What are you doing to them? I also managed to break mine, but replaced it with a 3.5mm Allen bolt which I had at home. A bit cheaper than Michelle's option, but I am cheapskate. Link to comment Share on other sites More sharing options...
nicklock Posted 6 February 2017 Share Posted 6 February 2017 Fitting sights - you're doing it wrong. jonty and tufty 2 Link to comment Share on other sites More sharing options...
GaryD Posted 6 February 2017 Share Posted 6 February 2017 Fitting sights - you're doing it wrong. Ha Ha Link to comment Share on other sites More sharing options...
jonty Posted 6 February 2017 Share Posted 6 February 2017 These are finely engineered parts, and should NEVER be tightened up like you would a wheel nut on an E.R.F. I must have said it a million times on here, be gentle with bolts whether it be on sights, buttplates or an outside toilet door. The excellently spotted item by Batty does include a new clamp and its tiny springs as well as the required bolt. Jonty batty and tufty 2 Link to comment Share on other sites More sharing options...
tufty Posted 7 February 2017 Share Posted 7 February 2017 Just the screw is £7, but I have a couple of spares,so if you want to give me £7 for one let me know Link to comment Share on other sites More sharing options...
Huey Posted 24 February 2017 Share Posted 24 February 2017 This being the bit that usually wears out first Anschutz have decided not to make it anymore. According to Ruag it's unavailable Oooh - is the Anschutz 7003 out? Odd choice not to support a current product. Link to comment Share on other sites More sharing options...
Coiln Posted 25 February 2017 Share Posted 25 February 2017 No their more interested in selling you new sights than carry spares to repair your own Link to comment Share on other sites More sharing options...
hps1200 Posted 25 February 2017 Share Posted 25 February 2017 The early models of the sight in question used a slightly different but similar set of clamps & screws for mounting the sight on the receiver. The screws, springs & clamps for the later, current models are available from Anschutz or the local importer. Huey 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now