jonty

I have to confess, I have never seen a Match 64. I looked at the foto of the stock and assumed it was some very early Match 54. TR shooter, if you have a square to round adapter with the M6 Fine countersunk screws, one way to solve it is to mark thro the action holes in it into the wooden stock and then carefully drill holes with enough diameter to clear standard cap head screws, then obtain cap head screws instead of countersunk. I think the only way to get M6 Fine countersunk screws would be to have some made. I have an old Match 54 stock with rubber buttplate that has the bolts with washers and thought, wrongly, it was same/similar to what TR shooter had. J

If TRshooter is reffering to action bolts , are they not M5 Fine. Very hard, probably impossible to just get from a hardware store. Also, dont these action bolts come with a series of washers fitted to them!

it can be yours Buz.

I have for sale one System Gemini Aktiv handstop in grey. It has seen very little use and is in perfect condition. It comes with additional spacer and the original box. The quality of these items speak for themselves. New, they are £125, I am looking for £90 which will include shipping. If you have any questions, please ask.

Having 'Googled' is it a clamp to hold a palm rest onto a rifle grip? Its difficult from the internet picture of one to identify what or where it goes. Jonty

Hello, I have one System Gemini Aktiv Handstop for sale. It comes with an additional spacer, allen key, and removeable sling loop and is complete with its Original box. The colour is grey so will compliment any colour of rifle. The condition is excellent. New these are £125.00 plus shipping, I am looking for £95.00 which will include postage. If you have any questions please ask.

Hi, Are you sure its 22mm? The box for the iris shows it to be M18 and the tunnel looks to be an 18mm. Jonty

UPDATE- A home was found and the barrelled action is no longer available. Jonty

Ive sent you a P.M Jonty

I have for sale One Gemini Ultra rifle stock. It is machined to take Anschutz round action. These were an early version for Gemini and have, I believe maple woodwork and an alloy chassis. The bedding bolts are present. The buttplate carrier extends and locks in place using spacers, These are not present, but easily available on eBay in a colour of your choice. The cheekpiece adjusts vertically and laterally. The condition is very good with only minor marks from limited use. These are very rare, especially in this condition. Look at the phots carefully. Thank You for looking.

Tim, Would someone be able to produce one from a 3D printer? I appreciate its not wood. J

Phil, Doesnt the sling loop detach from the handstop by depressing the button under the loop? I thought these were a standard type of loop which can be removed! Jonty

Personally, I think the flexible adjuster is one of the most useful items you could use in target shooting, obviously on stands that will accept them. UNC sounds right, UNF (Unified national Fine (Thread)) the C is for Coarse. With Fine you would be winding it forever.

I prefer the moniker 'flexible adjuster'. When I get down into position, it is easy to fine adjust the scope into the position you require. With a right hand shooter, with the scope and stand on the left and the left hand set in the sling, it was always difficult to try to reach the old round headed adjuster, the flexible adjuster eliminates this problem. Im surprised someone isnt turning them out by the bucket load. Just a word to the wise. Ive noticed that some of the original adjusting knobs, mainly on Tuckers stands, can have different threads. This could of course be due to someone re-tapping the hole to fit a different knob, if they have lost the original and decided to replace it with an easier to obtain thread. I think, from memory, that in Andrew Tucker stands, the thread was 'UNF'. This can easily be checked by taking the diameter of the threaded knob, and checking it against details of threads that can easily be found on a Google search. These details will give you 'Threads per inch' so using a rule, count the threads. This should correspond with the old known threads, BSF, BSW, UNF and UNC. Metric threads were not used in days of yore. As for the Freeland scope, being American, they are more than likely to be one of the first above four threads. Jonty

Now I have your interest, I have a Match 54 barrelled action which is Free to a good home. It has not been used for many a year but prepared and kept in storage. At some time in its life, it appears it was stored in a wood stock and the moisture in the wood has affected and removed the blueing from underneath the action. The bore condition appears good. Although it will have fired many rounds in its lifetime, it still shoots very accurately and Im sure someone can make good use of it. Face to face transaction in Wakefield, West Yorkshire or RFD to RFD at your cost. If you have any questions, please ask. You must have a space of course on your FAC for a .22 rifle. There is not a trigger unit with this item. Thank You Jonty

Hi, Sorry for the late reply. Yes I still have it. Its been in storage for some time, but keep checking it and re-oiling it.

PM sent.

Oi, Dont knock our Champion Whippets. Good currency round here, better than that 'Bit of a coin'.

Hi, I am seeking an Anschutz, ideally a 5071 trigger unit, or maybe the model they used prior to that. It's to fit an old Match 54 barrelled action. If you have one or know someone who has, please send me a P.M. Thank You Jonty

I would agree that the fine thread is to give more engagement for the bolt with the thread depth being shallow. However, Some, if not all, 4760 Armadillo hook buttplates, have fine thread on the bolt which goes through the hooks elbow and screws into the actual buttplate. I would imagine the bolt is 6 or more mm diameter, and screws in a fair way, so why did Anschutz use a MFine thread? Treat these bolts like gold as they are very hard to find, if at all. jonty

Welcome to the forum knocky1. Yes it will fit your Match 54. It bolts to the black carrier your existing buttplate is fixed to. Hope fully you will be able to use the existing bolts and fasteners. Remove the buttplate that goes up and down to see if you can see the fasteners, if not, remove the whole existing buttplate from the stock to access the fasteners. You will probably need a 4mm Allen key. Jonty

Hi Jason, These are on the UK eBay site. I know they are copies but...... Surprisingly it says it is for II and III models. if you click on his 'other items for sale' he has the spacers too. https://www.ebay.co.uk/itm/143410607232?var=442348062444&hash=item2163f03480:g:obQAAOSwBetdo5vJ&amdata=enc%3AAQAIAAAA0AFbbwYmrWvkvIo2A8dNkpBs8ceqFoEtLAg6z0IsrVlbJM9Ar5xrC4w%2BbbfFRpFFOhku2Eu1sRo%2FrdCrOqJaiTwxbqz1WB4CM3kPvgbgpxjIc8WShnCUctgsWnqgoIGXheOzBFFDsSYypr1MZAEmD8m5rfqIhtEcumCSZuSRqFR4q8Ijgn96zBFTEB1ZU0hvoktchAtq4onLOzY9rPSIjhPwRMjA7yBAWse81YDqZWTvFt%2FtohxCs4mXE%2B0DbtkhK390xzn%2BFFsIaTUEW3YusPY%3D|tkp%3ABk9SR6TWjrH_YQ Regards

Hello Ramos. Im sure you know the rules, you need to add a price for the scope.

What is wrong with your existing bolt, or, is it you dont have one or you want a spare. I would imagine a new bolt would be quite prohibitive on price, plus with it being a 'component part' you will need it to go on your FAC, so would need a 'space' for it. Jonty

To clarify, the receiver on my MEC stock is for a flat bottomed action. The receiver is very narrow. An Anschutz square to round adapter is too wide to fit in and the hole spaceings are totally different. As stated, I will get some dimensions and a picture in the New Year. Jonty