We have a problem with on of our club Match 64 (1403) dating from 1974!.
The part of the sear on the bolt has become too worn to lock the bolt cocked. A local gunsmith has looked at it and managed a temporary repair with careful grinding but it didn't last long and now he says it needs a replacement part.
The part no is 1392-12 Schlagbolzenmutter or Cocking piece (number 12 on the diagram below). I have found in an Anschutz spare price list but I wonder if anyone has one knocking about before we try to purchase a replacement from Anschutz.
I know its probably a long shot but if such a thing exists rattling around your club we can make good use of it.
Thanks in advance .
M6 fine (M6 x 0.75) when seaching.
Ensure that the thread is 0.75mm pitch not the standard 1mm.
Lengths are then the fun part... too long for the rear bolt will jam the bolt!
They are not recommended for use. Better with a plain metal one and a magnifying glass as you can then see the edge in the correct and proscribed manner.
M6 0.75 pitch (fine pitch)... Ebay or other fastener suppliers and cut to length. I suggest you buy socket head (allen bolts). You will find Anschutz supplied bolts are £25 quid or so (each...)
Does anyone have a spare 5071 trigger lying around? Or parts of one...
I need the following bit for a friends rifle - No 15 on the diagram - part no 5071-U9/1 Auslöseklinke (Release Catch)
Thanks
Simon
Deletion can only be done by a moderator, but you can edit the thread title to something like Anschutz sight - SOLD!
To do this go to your original post and click on edit at the bottom right of the post. When the editor opens click on use Full Editor. Once that opens you can edit the thread tile to reflect that the item has been sold.
On behalf of club member - Required:
Foresight tunnel, either 18mm or 22mm, to fit old style Anschutz foresight mounting block.
and
Rearsight... to fit Anschutz dovetail - any make considered.
Please pm me via the forum.
Thanks
Simon
Make sure you have not put the safety catch (the bit furthest to the left) on incorrectly... its a fiddle to fit normally and it is possible to get it to look as its correct but its not and it will lock up....
******SORTED!********
Does anyone have a right handed Match 64 stock lying around? The rifle we have has a left handed stock on it but is a right handed action and we would like to use it for right handers....
Thanks
Simon
Thanks for looking - have been offered a stock!
Does anyone know of a source of Linatex sheeting other than the NSRA? (seems to be very expensive?).
The stuff the NSRA sells is only 1.2 m wide which means we have to have several lengths vertically with overlapping joins. We would like to have a single strip so it would have to be at least 1.4 metres wide.
Thanks
Simon