Jump to content


  • Content count

  • Joined

  • Last visited

  1. Home Trainers

    So, are you selling your wife then?
  2. Good 3p Rifle Required.

    If you have been shooting with a 1907, you will find the extra weight of the 1913 difficult for a 3P shoot to start with. If you put a metal stock like a Gemini onto that barrel it will be even heavier also remember that once you have a decent buttplate, sights and a palm rest, this adds to the weight. If you will be shooting in competitons where there is a limit on rifle weight (3x20), you may go over the limit. There's nothing wrong with putting a 1907 barrel on another stock, and it will make a difference to the weight Jim
  3. Dicounted Fuel!!

    It sounds like you must live in a town. Those of us who don't, have no alternative to using a car. Nearest train station 18 miles from the house, and three miles from the office. no bus from the house to the station, no bus from the station to the office. Nearest bus 4 miles from the house, and once an hour, and only goes to the city where I would have to change and take another bus out to the office, about 2 1/2 hrs each way. I'm not going to do it. You, and the government, bless them, seem to think that everything and everybody should work to a system that suits your lifestyle, and then we'll all be OK Not so Personally, I would support the government if it put the road tax up AS LONG AS ALL THE REVENUE WENT TOWARDS ROADS AND PUBLIC TRANSPORT. But it won't. All the road tax disappears into the treasury black hole
  4. Comb Spacers

    Ammo Box lids work very well
  5. 4mm Sight Raising Block Wanted

    Take care if you end up with the Centra 4 mm block It is held on with 4 or 6 hexbolts which tighten down onto the action. If you are in the habit of taking off the block between shoots, or for different positions, then it is almost impossible to get back to the same degree of tightening, and the zero point has moved. Furthermore, because the hexbolts can be tightened so easily, overtightening will bend the alu block itself, until ultimately the chamfer at either side can no longer fit on the rail - too wide I use one, but it never comes off the rifle so this isn't a problem Jim
  6. Rifle And Boots Foe Sale

    That bolt looks like a 19 series. the bolt on the 14 series had the flap at the back for a safety catch. the trigger on the 14 series is different - that is the whole trigger, but most noticably the blade. There was an 1813 produced - which I think uses the same action as the 19 series, but has a block for the foresight rather than the grooves. My rifle is an 18 series with a number beginning 198--- However, I would guess there was an crossover when changing between styles - which I think would be indicated by an X at the end of the number. Actually, I think the number would be able to define it - there must be a list which says number aaa-bbb is a 14 series, bbb-ccc is an 18 series, and ccc-ddd is a 19 series action Jim
  7. Scatt System

    I need a power supply as well However since I am an electical dunce, can you give me the part number from Maplin, or an exact description (is what is there enough?). I just want to be sure that I get the right thing before I plug it in. Jim
  8. Light Weight Scope Stand

    Neil Take a look at my one next time you are in the club Jim Good grief ! - what have I just said ?
  9. Air Rifle

    Hi I'm looking for a second hand air rifle. Preferably on an Alu stock - not on wood Compressed air cylinder etc anybody know of someone selling? Jim
  10. Lift from Scotland to Bisley

    Is anyone planning to drive from Scotland to Bisley for the Long Easter Weekend. I have a junior (with a lot of kit) needing a lift. Jim
  11. Headspace gauge

    I think that 36 is too small - I reckon about 40 is right. 42 is probably ok but should be checked regularly to be sure it isn't getting bigger. Of course you may find that different gauges all give different results - or even different operators will get different results. Get Bert to check at Eley as well and see how they compare
  12. Gemini Stock

    I am trying to put together a Gemini stock. I've got the front bit, but I need the bits that go on the back end - Butt and Cheekpiece, possibly a buttplate. Anyone got spares that they no longer want? Jim